| Main Material: | Rubber |
|---|---|
| Delivery Time: | 20-30 Days Once Order Confirmed |
| Function: | Repairing |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product Description:
HOPSON Plug repair unit requires no special wire-pulling tools. Just insert the plug into the injury from the inside of the tire and pull the repair unit through from the outside. Both the stem and the repair unit are gum coated to provide the most complete bond, both through the injury and on the inner liner.
The plug repair patches are black with gray vulcanizing gum and will vulcanize chemically or in a heat-curing system.
Box of 24 plugs to repair a 6mm injury to a tire. Repairs the hole and surface with one product, protecting against leaks and sealing against humidity.
General Information:
Product name: Tyre Repair Plug Patch
Part No.: MP-466
Specification: Patch Size (46mm), Stem Diameter (6mm)
Packing: 24pcs/box, 36box/ctn
Sample: can be available as requested
| Part No. | Description | Box Qty (pcs/box) |
CTN Qty (box) |
|
| MP-253 | Patch Size(25mm),Stem Dia(3mm) | 48 | 36 | |
| MP-364 | Patch Size (36mm),Stem Diameter (4mm) | 24 | 36 | |
| MP-366 | Patch Size (36mm),Stem Diameter (6mm) | 24 | 36 | |
| MP-466 | Patch Size (46mm),Stem Diameter (6mm) | 24 | 36 | |
| MP-507 | Patch Size(56mm),Stem Dia(7mm) | 24 | 48 | |
| MP-609 | Patch Size (60mm),Stem Diameter (9mm) | 24 | 48 | |
| MP-912 | Patch Size (88*88mm),Stem Dia(12mm),SquareShape | 24 | 12 | |
| MP-1014 | Patch Size (100*100mm),Stem Diameter (14mm),Square | 24 | 12 | |
| mo-1018 | Patch Size(100*100mm),Stem Dia(18mm) | 24 | 12 | |
INSTRUCTIONS:
REPAIR PROCEDURES FOR COMBINATION REPAIR UNITS
Before repairing, mark and remove the puncturing object. With the tire inflated, apply soap solution to the damaged area to determine if air loss is from one or more punctures. Remove the tire from the wheel carefully to avoid further damage and place it on the spreader.
PROBING
Probe puncture to determine the size and direction of injury, making sure to remove all foreign materials. DO NOT repair it when the injury is beyond puncture repair limits.
INTERNAL EXAMINATION
Spread the beads and mark the damaged area with a crayon. Carefully inspect the tire to ensure that all damage is within repairable limits. If limits are exceeded, DO NOT repair the tire.
REPAIR UNIT SELECTION
If the injury is 1/4''(6mm) or smaller in diameter and the angle does not exceed 25Y, a combination repair unit is the easiest method of repair. Reinforced Combination Units are for tread area only Universal and Lead-Wire Combination Units may be used in any repairable area.
CLEANING
Using a buffing solution and an inner scraper, clean thoroughly an area slightly larger than the patch head of the repair unit. This serves to remove dirt and mold lubricants for better adhesion.
BUFFING
Using a buffing wheel, buff the repair area to texture taking care not to gouge the inner liner. Using the appropriate reamer of cutter(for lead-wire units), drill injury channel from inside and from outside, removing damaged cables and debris. Vacuum away buffing dust.
CEMENTING
Apply vulcanizing cement to the injury channel and prepared the repair area. Work cement into the rubber. DO NOT puddle or scrape off. ALLOW CEMENT TO DRY THOROUGHLY.
INSERTION
Remove backing from patch head(and stem of Lead-Wire Units) DO NOT touch gum surface. Push quill or lead wire into the injury from inside and pull through with pliers. Pull until the patch head is seated firmly against the inner liner.
FINISH REPAIR
Thoroughly stitch the patch bead to the inner liner working from the center outward to remove any trapped air. Cut the stem 1/8'' above the tread surface. Apply Inner Liner Sealer to the overbuffing area and allow to dry.
For more information, pls feel free to contact us.
Pls note: In your inquiry email, pls kindly include the following information if possible.
Part No.
Quantity you need
Packaging request
Which helps us to reply to you efficiently. Thank you.
For more information, pls feel free to contact us.
Don't miss the opportunity to check out our full range of tire repair products.
HOPSON TYRE REPAIR will always surprise you!
FAQ
Q: Are you a trading company or manufacturer?
A: We are a manufacturer and also a trading company, so we can provide both good prices and excellent service.
Q: Can I use our own LOGO?
A: Yes, if the customer wants a large quantity, we can use the customer's design.
Q: Do you provide samples? Is it free or extra?
A: Yes, the sample is free if it is in stock, but the customer will pay for the freight.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock, or the delivery time is 20-30 days.
Q: MOQ?
A: Different products are different, we welcome the negotiation.
Q: What about your customer service after sales?
A: Generally, we have 2 years quality guarantee, except for some special products.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}