10mm Stem Repair Plugs, Square
|FOB Price:||US $0.6 / Piece|
|Min. Order:||300 Bags|
|Min. Order||FOB Price|
|300 Bags||US $0.6/ Piece|
|Transport Package:||24PCS/Box, 12box/CTN.|
|Payment Terms:||L/C, T/T|
- Model NO.: MP-1014
- Stem Diameter: 14mm
- Function: Tyre Repairing
- Trademark: HOPSON TYRE REPAIR
- Origin: Ningbo, China
- Size: 100*100mm
- Shape: Square
- Type: Tyre Repair Plug Patch
- Specification: CE, SGS
REPAIR PROCEDURES FOR COMBINATION REPAIR UNITS
Before repairing, mark and remove puncturing object. With tyre inflated, apply soap solution to damaged area to determine if air loss is from one or more punctures. Remove tyre from wheel carefully to avoid further damage and place on spreader.
Probe puncture to determine size and direction of injury, making sure to remove all foreign materials. DO NOT repair it when injury is beyond puncture repair limits.
Spread the beads and mark the damaged area with a crayon. Carefully inspect tyre to ensure that all damage is within repairable limits. If limits are exceeded, DO NOT repair the tyre.
REPAIR UNIT SELECTION
If injury is 1/4''(6mm) or smaller in diamater and angle does not exceed 25Y, a combination repair unit is the easiest method of repair. Reinforced Combination Units are for tread area only Universal and Lead-Wire Combination Units may be used in any repairable area.
Using buffing solution and an inner scraper, clean thoroughly an area slightly larger than the patch head of the repair unit. This serves to remove dirt and mold lubricants for better adhesion.
Using a buffing wheel, buff repair area to texture taking care not to gouge the inner liner. Using appropriate reamer of cutter(for lead-wire units), drill injury channel from inside and from outside, removing damaged cables and debris. Vacuum away buffing dust.
Apply vulcanizing cement to the injury channel and prepared repair area. Work cement into the rubber. DO NOT puddle or scrape pff. ALLOW CEMENT TO DRY THOROUGHLY.
Remove backing from patch head(and stem fo Lead-Wire Units) DO NOT touch gum surface. Push quill or lead wire into the injury from inside and pull through with pliers. Pull until patch head is seated firmly against the inner liner.
Thoroughly stitch the patch bead to the inner liner working from the center outward to remove any trapped air. Cut the stem 1/8'' above tread surface. Apply Inner Liner Sealer to overbuffing area and allow to dry.
In your inquiry email, pls kindly include the following information if possible.
Which help us to reply to you efficiently. Thank you.
For more information, pls feel free to contact us.
|Part No.||Description||Box Qty|
|MP-264||Patch Size (26mm),Stem Diameter (4mm)||60||36|
|MP-364||Patch Size (36mm),Stem Diameter (4mm)||24||36|
|MP-366||Patch Size (36mm),Stem Diameter (6mm)||24||36|
|MP-466||Patch Size (46mm),Stem Diameter (6mm)||24||36|
|MP-509||Patch Size (50mm),Stem Diameter (9mm)||24||27|
|MP-606||Patch Size (60mm),Stem Diameter (6mm)||24||27|
|MP-609||Patch Size (60mm),Stem Diameter (9mm)||24||27|
|MP-1014||Patch Size (100*100mm),Stem Diameter (14mm),Square||24||12|